Panasonic KX-UTG200

Operating Bank
Description Indicates the storage area of the firmware that is currently operating
(reference only).
Value Range
• Bank1
• Bank2
Default Value Not applicable.
Firmware Version (Bank1)
Description Indicates the Bank1 firmware version (reference only).
Value Range Firmware version ("APPUTG300B_nn.nnn"/"APPUTG200B_nn.nnn"
[n=0-9])
Default Value Current firmware version
Firmware Version (Bank2)
Description Indicates the Bank2 firmware version (reference only).
Value Range Firmware version ("APPUTG300B_nn.nnn"/"APPUTG200B_nn.nnn"
[n=0-9])
Default Value Current firmware version
KEM1 Version
Description Indicates the firmware version (reference only) of KEM1 (KX-UTA336
Add-on Key Module).
Value Range Not applicable
Default Value Current firmware version
KEM2 Version
Description Indicates the firmware version (reference only) of KEM2 (KX-UTA336
Add-on Key Module).
Value Range Not applicable
Default Value Current firmware version
4.2.2 Network Status
This screen allows you to view the current network information of the unit, such as the MAC address, IP
address, Ethernet port status, etc.
Document Version 2015-01 Administrator Guide 87
4.2.2 Network Status