Panasonic KX-UTG200

Description
Description Indicates the description configured for the location.
Value Range 0-128
Default Value Not applicable.
4.7.5.3 Phone Number
Enable this Location (1-10)
Description Specifies whether each location is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Phone Number (1-10)
Description Specifies the phone number of each location.
Value Range Max. 20 characters
Default Value Not stored.
Description (1-10)
Description Specifies a text description for each location.
Value Range Max. 128 characters
Default Value Not stored.
Enable Diversion Inhibitor
Description Specifies whether to prevents calls that are redirected by a user from
being redirected again by the caller.
Value Range
• Yes (prevents calls from being redirected again by the caller)
• No (allows the caller to redirect calls)
Default Value No
Require Answer Confirmation
Description Specifies whether answer confirmation is required.
Document Version 2015-01 Administrator Guide 179
4.7.5 Broadsoft Settings [Anywhere]