Panasonic KX-UTG200

4.3.2 IPv4 Network Settings
This screen allows you to change the IPv4 settings.
4.3.2.1 Connection Settings
IP Connection Mode
Description Specifies whether the unit has a static IP address or receives its
address from a DHCP server.
Value Range
• DHCP
• Static
Default Value DHCP
Configuration File Reference DHCP_ENABLE (Page 268)
DNS Connection Mode
Description Specifies whether the DNS servers that the unit refers to are specified
via static IP addresses, or if the unit receives the IP addresses from
DHCP server.
Value Range
• DHCP
• Static
Default Value DHCP
Configuration File Reference DHCP_DNS_ENABLE (Page 268)
Document Version 2015-01 Administrator Guide 97
4.3.2 IPv4 Network Settings