Panasonic KX-UTG200

Value Range 0-2
– 0: Dual mode (normal and single images can be upgraded)
– 1: Single image only (only single images can be upgraded)
– 2: Normal image (non-single image) only (only normal images can
be upgraded)
Default Value 0 (Dual mode)
5.4.6 Provisioning Settings
PROVISION_ENABLE
Value Format Boolean
Description Specifies whether to enable auto provisioning.
Value Range
• Y/Yes (Enable auto provisioning)
• N/No (Disable auto provisioning)
Default Value
Y
Web User Interface Reference Enable Provisioning (Page 186)
OPTION160_ENABLE
Value Format Boolean
Description Specifies whether to enable the device to look for the Provisioning URL
in DHCP option 160.
Note
• If the Provisioning URL provided by DHCP option 160 does not
specify a filename, the unit will append the filename from DHCP
option67 first if provided.
Value Range
• Y/Yes (Enable DHTPv4 option 160)
• N/No (Disable DHTPv4 option 160)
Default Value
Y
Web User Interface Reference Enable DHCP Option 160 (Page 187)
OPTION159_ENABLE
Value Format Boolean
Document Version 2015-01 Administrator Guide 255
5.4.6 Provisioning Settings