4.6.12.1 Screen Saver
Wait Time
Description Specifies the length of time, in minutes, within the next operation must
be done. When this timer expires, the unit will enter screen save mode.
Value Range 0-10 (0: Disable)
Default Value 0
Configuration File Reference SCREEN_SAVE_TIMER (Page 295)
4.6.12.2 List
To import screen savers, click [Choose File] to select the screen saver file and then click [Import]. To delete
screen savers, click [Delete].
4.6.13 Distinctive Ring
This screen allows you to configure distinctive ring settings.
4.6.13.1 Enable Distinctive Ring
Enable Distinctive Ring
Description Specifies whether to enable or disable Distinctive ring.
Value Range
• Y: Enables Distinctive ring
• N: Disables Distinctive ring
Default Value N
172 Administrator Guide Document Version 2015-01
4.6.13 Distinctive Ring
To Next Page
Loading...
