Panasonic KX-UTG200

5.4.5 Firmware Update Settings
FIRM_UPGRADE_ENABLE
Value Format Boolean
Description Specifies whether to perform firmware updates when the unit detects a
change in the firmware version.
Note
• Changing this setting may require restarting the unit.
• Local firmware updates from the Web user interface (® see
4.8.4 Local Firmware Update) can be performed regardless
of this setting.
Value Range
• Y/Yes (Enable firmware updates)
• N/No (Disable firmware updates)
Default Value
Y
Web User Interface Reference Enable Firmware Update (Page 183)
FIRM_VERSION
Value Format String
Description Specifies the firmware version of the unit (e.g. nn.nnn [n=0-9]).
Note
• Changing this setting may require restarting the unit.
Value Range Not applicable.
Default Value Empty string
FIRM_FILE_PATH
Value Format String
Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
• Changing this setting may require restarting the unit.
Document Version 2015-01 Administrator Guide 253
5.4.5 Firmware Update Settings