Panasonic KX-UTG200

KEM_VERSION
Value Format String
Description Specifies the target KEM version (e.g. n.nnn [n=0-9]).
Value Range Not applicable.
Default Value Empty string
KEM_FILE_PATH
Value Format String
Description Specifies the URL where the KEM file is stored.
Value Range Max. 1024 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
• If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this URL, it will be replaced with
"FIRM_VERSION" depending on the system. Note that this rule
differs from other parameters such as "SIP_USER_AGENT".
Default Value Empty string
KEM_UPGRADE_AUTO
Value Format Boolean
Description Specifies whether to display a confirmation message asking the user
to perform a KEM update (manual) or perform the KEM update without
asking the user (automatic) when the unit detects a newer version of
KEM.
Value Range
• Y/Yes (Enable automatic KEM update)
• N/No (Disable automatic KEM update)
Default Value
Y
252 Administrator Guide Document Version 2015-01
5.4.4 KEM (KX-UTA336 Add-on Key Module) Update Settings