Panasonic KX-UTG200

4.7.4.1 Simultaneous Ring Settings
Enable Simultaneous Ring
Description Specifies whether the simultaneous ring feature of Remote Office is
enabled or disabled.
Value Range
• Yes
• No
Default Value No
Do not ring my Simultaneous Ring Numbers if I'm already on a call
Description Specifies whether the phone numbers specified for the simultaneous
ring feature ring when the user is already on a call.
Value Range
• Yes
• No
Default Value No
Phone Number (1-10)
Description Specifies the phone numbers used for the simultaneous ring feature.
Value Range Max. 128 characters
Default Value Not stored.
Answer confirmation required (1-10)
Description Specifies whether answer confirmation is required when calling the
simultaneous ring numbers.
Value Range
• Yes
• No
Default Value No
Document Version 2015-01 Administrator Guide 177
4.7.4 Broadsoft Settings [Simultaneous Ring]