4.6.9 LDAP
This screen allows you to change the LDAP settings.
4.6.9.1 LDAP
Enable LDAP
Description Specifies whether LDAP is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Configuration File Reference LDAP_ENABLE (Page 284)
LDAP Server Address
Description Specifies the address (in dotted-decimal notation or FQDN) used when
accessing the LDAP server.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference LDAP_SERVER (Page 284)
LDAP Server Port
Description Specifies the port used when accessing the LDAP server.
Value Range 1–65535
168 Administrator Guide Document Version 2015-01
4.6.9 LDAP
To Next Page
Loading...
