Panasonic KX-UTG200

4.6.2.4 Call Forward
Unconditional (Enable Call Forward)
Description Selects whether to forward all incoming calls to a specified destination.
Note
• If Do Not Disturb has been enabled on the server, the server
rejects incoming calls and the unit does not receive any calls,
even if you have selected [Yes] for this setting.
• If you have selected [Yes] for this setting and Call Forward has
been enabled on the server, but the forwarding destinations
differ, incoming calls are forwarded to the destination set on the
server.
• If Call Forward has been enabled on the server, incoming calls
are forwarded to the destination set on the server, even if you
have selected [No] for this setting.
• You can synchronize the Do Not Disturb and Call Forward
settings from the Web user interface (® see [Feature Key
Synchronization] in 4.6.2.1 Call Control) or through
configuration file programming (® see
"FEATURE_KEY_SYNCHRO_ENABLE" in 5.9.2 Per Line - Call
Control Settings).
• If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
• Yes
• No
Default Value No
Configuration File Reference FWD_UNCONDITIONAL_ENABLE (Page 331)
Unconditional (Phone Number)
Description Specifies the phone number of the destination to forward all incoming
calls to.
Note
• If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
• Max. 32 characters for phone number format
• Max. 127 characters for URL format (except ", &, ', ;, <, >, and
space)
Note
• You cannot leave this field empty if [Unconditional (Enable
Call Forward)] is set to [Yes].
Document Version 2015-01 Administrator Guide 149
4.6.2 Call Control [Line 1]–[Line n]