Panasonic KX-UTG200

4.8.8.1 SNMP
Enable SNMP
Description Specifies whether SNMP is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Configuration File Reference SNMP_ENABLE (Page 265)
SNMP Manager IP
Description Specifies the IP address of the SNMP manager.
Value Range Max. 32 characters
Default Value Not stored.
Configuration File Reference SNMP_TRUST_IP (Page 265)
SNMP Port
Description Specifies the port of the SNMP manager.
Value Range 1-65535
Default Value Not stored.
Configuration File Reference SNMP_PORT (Page 265)
SNMP Location
Description Specifies the location for SNMP.
Value Range Max. 256 characters
Default Value Not stored.
Configuration File Reference SNMP_SYS_LOCATION (Page 267)
4.8.8.2 SNMP v1/v2c
SNMP RO Community
Description Specifies the SNMP v1/v2 read only community string.
Value Range Max. 32 characters
Default Value Not stored.
Document Version 2015-01 Administrator Guide 191
4.8.8 SNMP