Panasonic KX-UTG200

5.4.8 SNMP Settings
SNMP_ENABLE
Value Format Boolean
Description Specifies whether to enable SNMP agent for remote management.
Value Range
• Y/Yes (Enable SNMP)
• N/No (Disable SNMP)
Default Value
N
Web User Interface Reference Enable SNMP (Page 191)
SNMP_TRUST_IP
Value Format String
Description Specifies the IP address of the SNMP manager.
Value Range Max. 32 characters
Note
• The IP address format must be as follows
– IP address
For example: 192.168.5.123
– IP address/subnet
For example: 192.168.5.0/24
(this allows access from 192.168.5.0 to 192.168.5.255)
Default Value Empty string
Web User Interface Reference SNMP Manager IP (Page 191)
SNMP_PORT
Value Format Integer
Description Specifies the port of the SNMP manager.
Value Range 1 - 65535
Default Value 161
Web User Interface Reference SNMP Port (Page 191)
SNMP_COMMUNITY_STRING
Value Format String
Description Specifies the SNMP v1/v2 read only community string.
Value Range Max. 32 characters
Document Version 2015-01 Administrator Guide 265
5.4.8 SNMP Settings