Panasonic KX-UTG200

3.1.3 Port Mirroring Settings
Port mirroring is used for network monitoring and debugging purposes.
You can enable port mirroring by performing the procedure below from the unit.
To enable port mirroring
1. On the Home screen, select .
2. Press [#][5][9][0].
3. Select
Yes
.
3.1.4 Disabling the Touch Screen
Touch for the screen can be disabled. This is convenient when cleaning the screen.
You can disable touch for the screen by performing the procedure below from the unit.
To disable touch for the screen
1. On the Home screen, select .
2. Press [#][6][1][1].
3. Select
Yes
.
• Press [#][6][1][1] to enable the screen again.
3.1.5 Exporting phone user interface settings
Exporting of phone user interface settings is only available for the KX-UTG300 when it has a USB flash drive
connected to it.
You can export phone user interface settings to a USB flash drive by performing the procedure below from the
unit.
To export phone user interface settings
1. On the Home screen, select
.
2. Press [#][6][2][2].
3. Select
Yes
.
• If the export is successful, "Export UI Configuration Successful!" is displayed.
• If the export fails, "Export UI Configuration Failed!" is displayed.
66 Administrator Guide Document Version 2015-01
3.1.5 Exporting phone user interface settings