Panasonic KX-UTG200

4.9.6 Status Message
This screen allows you to check the status message of the unit. Click [Refresh] to refresh the displayed
messages.
4.9.7 Make Call
This screen allows you to make calls from the web user interface using a specified line. This is useful when
you want to perform debugging from a remote site via the web user interface.
4.9.7.1 Make Call
Line No.
Description Specifies the line to be used when making a call.
Note
• The available line number varies depending on the type of the
unit being used.
Value Range
• Line 1–Line 4 (for KX-UTG200)
• Line 1–Line 6 (for KX-UTG300)
Default Value Not applicable.
218 Administrator Guide Document Version 2015-01
4.9.7 Make Call