Panasonic KX-UTG200

4.3.2.2 Static Settings
Static IP Address
Description Specifies the IP address of the unit.
Note
• This setting is available only when [IP Connection Mode] is
set to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 29)
Configuration File Reference STATIC_IP_ADDR (Page 268)
Subnet Mask
Description Specifies the subnet mask of the unit.
Note
• This setting is available only when [IP Connection Mode] is
set to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 29)
Configuration File Reference STATIC_SUBNET_MASK (Page 269)
Default Gateway
Description Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
• This setting is available only when [IP Connection Mode] is
set to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 29)
Configuration File Reference STATIC_DEFAULT_GATEWAY (Page 269)
98 Administrator Guide Document Version 2015-01
4.3.2 IPv4 Network Settings