Panasonic KX-UTG200

DNS1
Description Specifies the IP address of the primary DNS server.
Note
• This setting is available only when [IP Connection Mode] is
set to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 29)
Configuration File Reference STATIC_DNS1_SVR (Page 269)
DNS2
Description Specifies the IP address of the secondary DNS server.
Note
• This setting is available only when [IP Connection Mode] is
set to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 29)
Configuration File Reference STATIC_DNS2_SVR (Page 270)
Document Version 2015-01 Administrator Guide 99
4.3.2 IPv4 Network Settings