Panasonic KX-UTG200

5.5 Network Settings
5.5.1 IP Settings
DHCP_ENABLE
Value Format Boolean
Description Specifies whether to assign the IP address automatically (DHCP) or
manually (static).
Value Range
• Y/Yes (Assign IP automatically (DHCP))
• N/No (Assign IP manually (use "STATIC_IP_ADDR",
"STATIC_SUBNET_MASK" and
"STATIC_DEFAULT_GATEWAY"))
Default Value
Y
DHCP_DNS_ENABLE
Value Format Boolean
Description Specifies whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
• This setting is available only when "DHCP_ENABLE" is set to
"Y".
Value Range
• Y/Yes (Receive DNS server address automatically)
• N/No (Use "STATIC_DNS1_SVR" or, "STATIC_DNS1_SVR" and
"STATIC_DNS2_SVR")
Default Value
Y
STATIC_IP_ADDR
Value Format String
Description Specifies the IP address for the unit.
Note
• This setting is available only when "DHCP_ENABLE" is set to
"N".
• When you specify this parameter, you must specify
"STATIC_SUBNET_MASK"
and "STATIC_DEFAULT_GATEWAY" together in a configuration
file.
Value Range Max. 15 characters (IP address in dotted-decimal notation)
268 Administrator Guide Document Version 2015-01
5.5.1 IP Settings