Panasonic KX-UTG200

Send Paging Timeout
Description Specifies the send paging timeout for multicast paging.
Value Range 0–86400, 0: Forever
Default Value 0
Configuration File Reference MPAGE_SEND_TIMER (Page 298)
Disconnect Paging Timeout
Description Specifies the disconnect paging timeout for multicast paging.
Value Range 1–10
Default Value 1
Configuration File Reference MPAGE_DISC_TIM (Page 299)
Paging Codec
Description Specifies the codec used for multicast paging.
Value Range
• G722
• PCMA
• G726-32
• G729A
• PCMU
Default Value G722
Configuration File Reference MPAGE_CODEC (Page 298)
Paging DND
Description Specifies whether paging DND is enabled or disabled.
Value Range
• Yes
• No
Default Value No
Configuration File Reference MPAGE_DND_ENABLE (Page 299)
Address (No. 1-10)
Description Specifies the addresses used for multicast paging.
Value Range Max. 127 characters (multicast IP address ranges from 224.0.0.0 to
239.255.255.255)
Default Value Not stored.
Document Version 2015-01 Administrator Guide 165
4.6.7 Telephone Settings