EasyManua.ls Logo

Panasonic KX-UTG200

Panasonic KX-UTG200
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CFG_ROOT_CERTIFICATE_PATH2 (Page 241)
CFG_ROOT_CERTIFICATE_PATH3 (Page 241)
2.7 Firmware Updates
2.7.1 Updating the Unit’s Firmware
After configuring the firmware update settings in the device configuration file, firmware will be updated after
provisioning. The firmware update procedure is as follows.
1. The device downloads its configuration file from the provisioning server.
2. The device compares the version number of the firmware in the configuration file to the device’s current
firmware version.
3. If a change in the firmware version is detected, the device downloads the firmware from the address
specified by FIRM_FILE_PATH in the configuration file.
4. After the firmware is downloaded, it is applied to the device and the device restarts.
For more information about the related parameters
FIRM_UPGRADE_ENABLE (Page 253)
FIRM_VERSION (Page 253)
FIRM_FILE_PATH (Page 253)
FIRM_UPGRADE_SUPPORT_IMAGE_MODE (Page 254)
2.7.2 Updating the KX-UTA336 Add-on Key Module's Firmware
After configuring the add-on key module update settings in the device configuration file, the connected add-on
key module (or add-on key modules) will be updated after provisioning. The add-on key module update
procedure is as follows.
1. The device downloads its configuration file from the provisioning server.
2. The device compares the version number of the add-on key module in the configuration file to the
connected add-on key module's current firmware version.
3. If a change in the firmware version is detected, the device downloads the add-on key module's firmware
from the address specified by KEM_FILE_PATH in the configuration file.
4. After the KEM firmware is downloaded, it is applied to the connected add-on key module (or add-on key
modules).
For more information about the related parameters
KEM_UPGRADE_ENABLE (Page 251)
KEM_VERSION (Page 252)
KEM_FILE_PATH (Page 252)
KEM_UPGRADE_AUTO (Page 252)
60 Administrator Guide Document Version 2015-01
2.7.2 Updating the KX-UTA336 Add-on Key Module's Firmware

Table of Contents

Other manuals for Panasonic KX-UTG200

Related product manuals