Panasonic KX-UTG200

Description Specifies the URL of the root certificate. When this parameter is
specified, the Embedded root certificate is ignored. This setting should
only be placed in the initial configuration file.
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
Value Range Max. 1024 characters
Default Value Empty string
CFG_ROOT_CERTIFICATE_PATH2
Value Format String
Description Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
Value Range Max. 1024 characters
Default Value Empty string
CFG_ROOT_CERTIFICATE_PATH3
Value Format String
Description Specifies the URL of the root certificate. This setting should only be
placed in the initial configuration file.
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
Document Version 2015-01 Administrator Guide 241
5.3.1 Certificate Settings