Panasonic KX-UTG200

5.3 Certificate Settings
5.3.1 Certificate Settings
CLIENT_CERTIFICATE_PATH
Value Format String
Description Specifies the URL of the device certificate.
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
Value Range Max. 1024 characters
Default Value Empty string
CLIENT_KEY_PATH
Value Format String
Description Specifies the URL of the device private key.
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
Value Range Max. 1024 characters
Default Value Empty string
CFG_ROOT_CERTIFICATE_PATH1
Value Format String
240 Administrator Guide Document Version 2015-01
5.3.1 Certificate Settings