Panasonic KX-UTG200

SCREEN_SAVE_TIMER
Value Format Integer
Description Specifies the length of time, in minutes, within the next operation must
be done. When this timer expires, the unit will enter screen save mode.
Value Range 0, 0-10
Default Value 0
Web User Interface Reference Wait Time (Page 172)
RECORDING_ENABLE
Value Format Boolean
Description Specifies whether to enable or disable recording.
Value Range
• Y/Yes (Enable recording)
• N/No (Disable recording)
Default Value
N
Web User Interface Reference Enable Recording (Page 163)
CID_DATA_PRIORITY_ENABLE
Value Format Boolean
Description Specifies the priority Caller ID.
Value Range
• Y/Yes (From > P-Asserted-Identity > Remote-Party-ID)
• N/No (P-Asserted-Identity > Remote-Party-ID >From)
Default Value
N
DISABLE_FACTORY_RESET_FROM_ADMIN
Value Format Boolean
Description Specifies whether to disable factory reset function when login as an
administrator on phone user interface and web user interface.
Value Range
• Y/Yes (Disables factory reset function when logged in as an
administrator.)
• N/No (Enables factory reset function when logged in as an
administrator.)
Default Value
N
Document Version 2015-01 Administrator Guide 295
5.6.2 Telephone Settings