Panasonic KX-UTG200

Description Specifies the value of the "Event" header sent from the SIP server to
the unit so that the unit can access the configuration files on the
provisioning server.
Value Range Max. 15 characters
Note
• An empty string is not allowed.
Default Value check-sync
Web User Interface Reference Header Value for Resync Event (Page 189)
USR_PROV_SVR_URL
Value Format String
Description Specifies the Provisioning Server URL.
Note
• The format of the IP address must be in dotted-decimal
notation, FQDN, or URL, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
• If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this URL, it will be replaced with the
unit’s firmware version.
Value Range Max. 1024 characters
Default Value Empty string
Web User Interface Reference Provision Server (Page 186)
USR_PROV_SVR_AUTH_ID
Value Format String
Description Specifies the authentication ID used to access the provisioning server.
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
Web User Interface Reference Authentication ID (Page 187)
USR_PROV_SVR_AUTH_PASSWORD
Value Format String
Document Version 2015-01 Administrator Guide 259
5.4.6 Provisioning Settings