Panasonic KX-UTG200

Description Specifies whether to enable the LDAP feature.
Value Range
• Y/Yes (Enable LDAP)
• N/No (Disable LDAP)
Default Value
N
Web User Interface Reference Enable LDAP (Page 168)
LDAP_USER_DN
Value Format String
Description Specifies the user DN required to access the LDAP server.
Value Range Max. 127 characters
Default Value Empty string
Web User Interface Reference LDAP Authentication ID (Page 169)
LDAP_PASSWORD
Value Format String
Description Specifies the password used to access the LDAP server.
Value Range Max. 127 characters
Default Value Empty string
Web User Interface Reference LDAP Authentication Password (Page 169)
5.5.11 Certificate Settings
CERT_ROOT_CA_APP_SPECIFY_1
Value Format String
Description Specifies the applications which can use the Server Root CA 1
(imported from provisioning) to do the security authentication.
Value Range Max. 32 characters
Note
• Comma separated strings must be used. Only specify the
following applications.
– prov
– 8021x
– fwupgrade
– tr069
Default Value prov,8021x,fwupgrade,tr069
Document Version 2015-01 Administrator Guide 285
5.5.11 Certificate Settings