Panasonic KX-UTG200

ENDCALL_TRANSFER_ENABLE
Value Format Boolean
Description Specifies if users can press the end call soft key to complete the
transfer.
Value Range
• Y/Yes (Enable End call transfer)
• N/No (Disable End call transfer)
Default Value
N
FOLLOW_SERVER_BELLCORE
Value Format Boolean
Description Specifies whether to follow server bell core requests.
Value Range
• Y/Yes (Follow server bell core request)
• N/No (Do not follow server bell core request)
Default Value
Y
BUSY_ON_CALL_END
Value Format Boolean
Description Specifies whether the unit should play a busy tone when the remote
party ends the call while the call is connected.
Value Range
• Y/Yes (Enable busy on call end)
• N/No (Disable busy on call end)
Default Value
Y
REORDER_TONE_TIM
Value Format Integer
Description Specifies the duration of the reorder tone.
Value Range 1-30
Default Value 5
DIRECT_TRANSFER_ENABLE
Value Format Boolean
Description Specifies whether to transfer the call directly when the configured line
has a connected call or a call on hold and the selected FB button is idle.
Document Version 2015-01 Administrator Guide 291
5.6.1 Call Control Settings