Panasonic KX-UTG200

Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Default Value Empty string
Web User Interface Reference SIP URI (Page 123)
LINE_ENABLE
Value Format Boolean
Description Specifies whether a line is enabled or disabled.
Value Range
• Y: Enable line
• N: Disable line
Default Value
N
Web User Interface Reference Enable Line (Page 122)
SIP_USER_AGENT
Value Format String
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 64 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference SIP User Agent (Page 126)
SIP_AUTHID
Value Format String
Description Specifies the authentication ID required to access the SIP server.
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
Web User Interface Reference Authentication ID (Page 126)
Document Version 2015-01 Administrator Guide 339
5.9.3 Per Line - SIP Settings