Panasonic KX-UTG200

Description Specifies whether INVITE/SUBSCRIBE will also follow the REGISTER
Failover result.
Value Range
• Y/Yes (INVITE/SUBSCRIBE will follow the REGISTER Failover
result.)
• N/No (INVITE/SUBSCRIBE will not follow the REGISTER Failover
result.)
Default Value
N
SIP_403_REG_SUB_RTX
Value Format Boolean
Description Specifies whether or not to send a request when a 403 Forbidden reply
is received from the server in response to an INVITE or SUBSCRIBE.
Value Range
• Y/Yes (Send)
• N/No (Do not send)
Default Value
N
SIP_DUAL_STACK_SDP_MODE
Value Format Integer
Description Specifies whether to bring IPv4 and IPv6 media separately in SDP.
Value Range 0–1
– 0 (Use alternate connectivity for dual stack)
– 1 (Use both IPv4 and IPv6 together for dual stack)
Default Value 0
AUTH_INCOMING_INVITE
Value Format Boolean
Description Specifies whether to authenticate the incoming INVITE.
Value Range
• Y/Yes (Authenticate incoming INVITE)
• N/No (Not authenticate incoming INVITE)
Default Value
N
SIP_RINGIN_TIMER
Value Format Integer
Description Specifies the timer, in seconds, for an incoming call. It would disconnect
the call if the timer expires (0: Disable).
Value Range 0, 10 - 65535
352 Administrator Guide Document Version 2015-01
5.9.3 Per Line - SIP Settings