Panasonic KX-UTG200

Value Range
• Y/Yes (If the server's address is FQDN, use the translated IP
address in Refer-To header to send the REFER packet)
• N/No (Use the original server setting (Refer-To header may bring
the FQDN).)
Default Value
N
REFER_TO_IP_FMT_ON_CONF
Value Format Boolean
Description Specifies whether to use the server's translated IP address in Refer-To
header of the REFER packet when having a conference call.
Value Range
• Y/Yes (If the server's address is FQDN, the translated IP address
is used in Refer-To header to send the REFER packet.)
• N/No (Use the original server setting (Refer-To header may bring
the FQDN))
Default Value
Y
SIP_ADD_ROUTE
Value Format Boolean
Description Specifies whether to add a route header if an outbound proxy is
configured.
Value Range
• Y/Yes (Add a route header)
• N/No (Do not add a route header)
Default Value
Y
5.10 Diagnostic Settings
5.10.1 Log Settings - General
LOG_TERMINAL_DISP_ENABLE
Value Format Boolean
Description Specifies whether to display the log on terminal, console or SSH.
Value Range
• Y/Yes (Display the log on terminal)
• N/No (Do not display the log on terminal)
Default Value
Y
354 Administrator Guide Document Version 2015-01
5.10.1 Log Settings - General