Panasonic KX-UTG200

Default Value Empty string (if empty, it will use the MAC String as the base file name)
LOG_UPLOAD_FILE_NAME_APPEND_MODE
Value Format Integer
Description Specifies whether to append time or serial number to the base file name
to generate the upload file name.
Value Range 0-1
• 0: time information is appended
• 1: a unique serial number is appended
Default Value 0
LOG_UPLOAD_PERIOD
Value Format Integer
Description Specifies how long (in minutes) to upload the log file.
Value Range 1-65535
Default Value 60 (minutes)
LOG_UPLOAD_IMME_ONCE_FULL_ENABLE
Value Format Boolean
Description Specifies whether to upload the file immediately if the file has reached
the max file size.
Value Range
• Y/Yes (once it reaches the max file size, the file is uploaded
immediately)
• N/No (do not upload the file even it reaches the max file size)
Default Value
Y
5.10.3 Log Settings - Log Level
LOG_LEVEL_CENTRAL
Value Format Integer
Description Specifies the debug level of the central module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
356 Administrator Guide Document Version 2015-01
5.10.3 Log Settings - Log Level