4. The unit receives the XML object and then downloads the image (http://172.20.70.170/logo.jpg).
5. After the image has finished downloading, it is displayed on the unit.
Note
• If the image for the logo or wallpaper fails to download, an existing image is displayed.
Deleting the Logo or Wallpaper
The following 2 methods can be used to delete the logo or wallpaper.
1. Delete the Logo or Wallpaper URL specified on the web user interface.
2. Receive the remove action in the ServiceObjBackground XML object.
Image requirements for the Logo and Wallpaper
Images used for the logo and wallpaper must meet the following requirements.
• Image file size:
– less than 1 MB
• Image format:
– JPG or PNG
• Maximum logo display area (the logo image must be within the specified area):
– KX-UTG200: 720 x 230 pixels
– KX-UTG300: 280 x 110 pixels
• Maximum wallpaper resolution:
– KX-UTG200: 800 x 425 pixels
– KX-UTG300: 320 x 212 pixels
Logo position on the display
The area where the logo can be displayed on the screen is shown in "Logo Region" in the following illustration.
The unit determines where to display the logo from the "PointX" and "PointY" values in
"ServiceObjBackground".
"PointX" and "PointY" positions
The following are examples of the "PointX" and "PointY" values set to different values.
Document Version 2015-01 Administrator Guide 379
6.4 Logo and Wallpaper Settings
To Next Page
Loading...
