to the Syslog server. Syslog servers can manage analysis and debugging of messages from various devices
and platforms.
Related configuration file parameters
• SYSLOG_ADDR (Page 250)
• SYSLOG_PORT (Page 251)
• SYSLOG_SERVER_ENABLE (Page 251)
• SYSLOG_SEVERITY (Page 251)
Log Level Settings
Log Level Settings (® see Page 198) is used to specify the type and class of logs uploaded to the server.
7.2.2 Log Display
Log Display (® see Page 214) is used to specify the type and class of logs and then display the specified logs.
7.2.3 Log Dump
Log Dump (® see Page 216) is used to export the "Console.log" log file. The "Console.log" log file can also
be exported to a USB flash drive connected to a KX-UTG300. "Console.log" log files can be exported to a USB
flash drive with the steps below.
1. Connect a USB flash drive to the USB port.
2. On the Home screen, select .
3. Select "Basic Phone Settings", and then press [ENTER].
4. Select "USB", and then press [ENTER].
5. Select "Export Log", and then select
.
7.2.4 System Dump
System Dump (® see Page 217) is used to export the unit's running information, such as the IP address
obtained from DHCP server, CDP/LLDP settings, and DHCP options. For details about the System Dump
function, consult your phone system dealer.
388 Administrator Guide Document Version 2015-01
7.2.4 System Dump
To Next Page
Loading...
