Page 5-15
SETTING PRODUCTION
MATERIALS
5
Procedures for Using Advanced Squeegees (Option)
1E4C-E-OMA05-A01-01
1D3C-055P
8. Adjust the sensor positions, and
align the height of the right and left
one.
∗ Make sure that the operation indicating lamp of
the sensor amplifier located at the left of the
head cover lights up as follows.
9. Close the safety cover.
10. Turn ON the servo switch.
11. Press + .
On On
Off On
Red Green
Light entered
(Without solder)
Light shielded
(With solder)
OFF ( )
ON ( )
SERVO
UNLOCK
Squeegee up
(Upper)
To Next Page
Loading...
