Pilz PNOZ s30 User Manual

Overview
Operating Manual PNOZ s30
1001715-EN-19
| 11
} Y32 ... Y34: Semiconductor outputs OUT 1 …- OUT 3 (auxiliary outputs)
} Y35: Semiconductor output OUT 4 (auxiliary output or analogue outputs)
} S11: +24 V / 30 mA (supply for S34, Y1 and Y2)
} S21: 0 V (GND for S11, S34, Y1 and Y2)
} S34: Start input
} Y1, Y2:
Y1: Feedback input for Rel. 1
Y2: Feedback input for Rel. 2
} Y30: 0 V ext (GND for select input and semiconductor outputs)
} Y31: 24 V ext (supply for semiconductor outputs)
} X6: RJ45 socket for connecting the encoder
(tracks A, /A, B, /B, Z, /Z, S and GND). Proximity switches can be connected via RJ45
socket or connection terminals.
} 1: Chip card
} 2: Display
} 3: USB connection
} 4: Rotary knob
} 5: Expansion interface for 2 more external relay outputs
} LEDs:
– Power
– In1
– In2
– Rel 1
– Rel 2
– Fault

Pilz PNOZ s30 Specifications

General

Brand	Pilz
Model	PNOZ s30
Category	Relays
Language	English