Pilz PNOZ s30 - Select Inputs; Semiconductor Outputs; Analogue Output; EMC-Compliant Wiring

Wiring
Operating Manual PNOZ s30
1001715-EN-19
| 51
7.9 Select inputs
7.10 Semiconductor outputs
7.11 Analogue output
Y35
- +
PLC
+24 V
7.12 EMC-compliant wiring
EMC-compliant wiring for connecting an encoder
Encoder
U B
PNOZ s30
RJ45
X6
To avoid EMC interference we recommend that the shield on the sensor cables or the
housing of the shielded junction box is only connected to earth at a single point:
A or B or C or D or E