Display menu - Configuration
Operating Manual PNOZ s30
1001715-EN-19
| 59
8.5 Use chip card
The parameters that are set on a unit can be stored on the chip card. The data is stored
along with a device identifier, the passwords, the name of the configuration and the check
sum. We recommend that you always operate the unit with a chip card.
} If the parameters on a device have been changed due to an error, they can be restored
using the backup copy on the chip card.
} If a unit requires maintenance or needs to be exchanged, the chip card can be used to
download the parameters to another unit.
INFORMATION
If you operate the unit without a chip card, the "Fault" LED will light and the
following message will appear once only: Please Insert SIM Card!. If you
change the parameters, the Please Insert SIM Card! message will re-
appear.
The message disappears after 30 s or by pressing the rotary knob.
To Next Page
Loading...
Need help?
General
