Security
Operating Manual PNOZ s30
1001715-EN-19
| 14
4 Security
} The product is not protected from physical manipulation or from reading of memory con-
tents during physical access. Use appropriate measures to ensure that there is no phys-
ical access by unauthorised persons. You should also use security seals so that you can
detect any manipulation of the product or interfaces. Installation inside a lockable control
cabinet is recommended as a minimum measure.
} To protect against unauthorised access, no cable may be plugged into the USB connec-
tion during normal operation.
} The configuration computer that accesses the product has to be protected from attacks
by a firewall or other suitable measures. We recommend that a virus scanner is used on
this configuration computer and updated regularly.