Pilz PNOZ s30 - Page 84

Display menu - Configuration
Operating Manual PNOZ s30
1001715-EN-19
| 84
Level Menu designation Description Display/Settings
- Please insert SIM
Card!
Appears when the device is oper-
ated without a chip card or when a
defective chip card is inserted,
appears again when parameters
are changed.
Info:
The message disappears after 30
s or by pressing the rotary knob
- Please insert writ-
able SIM Card!
Appears when the answer to
"Load SIM" and "Write Configur-
ation to SIM:" is "No"
- SIM: ........
CRC: .....
Load SIM
Default:
No?
Appears when device detects a
chip card with a valid configura-
tion.
-> Select whether the chip card
data is to be transferred to the
device.
- No?
- Yes?
- Write Configuration
to SIM:
Default:
No?
Appears
- When a chip card has been used
that does not yet contain data
- When a chip card has been used
that does not contain any valid
data
- When Load SIM No was selec-
ted
-> Select whether the data is to be
saved to the chip card.
- No?
- Yes?
- Upgrade config?
New CRC:
Default:
No?
Appears when a configuration
from devices with an older version
are to be copied (see Duplicate
chip card [ 62]).
- Upgrade SIM?
New CRC:
Default:
No?
Appears when an old configuration
has been loaded and changed
(see Compatibility with older
device versions [ 63]).