User’s Manual
4.18.5 RMON History Configuration
Configure RMON History table on this page. The entry index key is ID; screen in Figure 4-18-5 appears.
Figure 4-18-5: RMON History Configuration page Screenshot
The page includes the following fields:
Object Description
• Delete
Check to delete the entry. It will be deleted during the next save.
• ID
Indicates the index of the entry. The range is from 1 to 65535.
• Data Source
Indicates the port ID which wants to be monitored. If in stacking switch, the value
must add 1000*(switch ID-1), for example, if the port is switch 3 port 5, the value
is 2005.
• Interval
Indicates the interval in seconds for sampling the history statistics data.
The range is from 1 to 3600, default value is 1800 seconds.
• Buckets
Indicates the maximum data entries associated this History control entry stored in
RMON.
The range is from 1 to 3600, default value is 50.
• Buckets Granted
The number of data will be saved in the RMON.
Buttons
: Click to add a new community entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
