User’s Manual
Server Configuration
The table has one row for each TACACS+ server and a number of columns, which are:
Object Description
• Delete
To delete a TACACS+ server entry, check this box. The entry will be deleted during
the next Save.
• Hostname
The IP address or hostname of the TACACS+ server.
• Port
The TCP port to use on the TACACS+ server for authentication.
• Timeout
This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
• Key
This optional setting overrides the global key. Leaving it blank will use the global key.
Buttons
: Click to add a new TACACS+ server. An empty row is added to the table, and the
TACACS+ server can be configured as needed. Up to 5 servers are supported.
: Click to undo the addition of the new server.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.11.8 RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen in Figure 4-11-9 appears.
Figure 4-11-9: RADIUS Authentication/Accounting Server Overview page Screenshot
To Next Page
Loading...
Need help?
General
