Planet IGS-10020 Series - PTP Status

User’s Manual
371
‘P’ constant [1..1000] see above
• ‘I’ constant
[1..1000] see above
‘D’ constant [1..1000] see above
Unicast Slave Configuration
Object Description
• Duration
The number of seconds a master is requested to send Announce/Sync
messages. The request is repeated from the slave each Duration/4 seconds.
• Ip-address
IPv4 Address of the Master clock
• grant
The granted repetition period for the sync message
• Comm State
The state of the communication with the master, possible values are:
 IDLE : The entry is not in use.
 INIT : Announce is sent to the master (Waiting for a response).
 CONN : The master has responded.
 SELL : The assigned master is selected as current master.
 SYNC : The master is sending Sync messages.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.19.2 PTP Status
This page provides a status overview for PTP status. The PTP Status screen in Figure 4-19-2 appears.
Figure 4-19-2: PTP Status Page Screenshot