User’s Manual
• Start IP address
Indicates the start IP address for the access management entry.
• End IP address
Indicates the end IP address for the access management entry.
• HTTP/HTTPS
Indicates the host can access the switch from HTTP/HTTPS interface that the
host IP address matched the entry.
• SNMP
Indicates the host can access the switch from SNMP interface that the host IP
address matched the entry.
• TELNET/SSH
Indicates the host can access the switch from TELNET/SSH interface that the
host IP address matched the entry.
Buttons
: Click to add a new access management entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.12.3 Access Management Statistics
This page provides statistics for access management. The Access Management Statistics screen in Figure 4-12-3 appears.
Figure 4-12-3: Access Management Statistics Overview page Screenshot
The page includes the following fields:
Object Description
• Interface
The interface that allowed remote host can access the switch.
• Receive Packets
The received packets number from the interface under access management
mode is enabled.
• Allow Packets
The allowed packets number from the interface under access management
mode is enabled.
• Discard Packets
The discarded packets number from the interface under access management
mode is enabled.
To Next Page
Loading...
Need help?
General
