User’s Manual of IGS-20040MT
111
each second, while Passive will wait for a LACP packet from a partner (speak if
spoken to).
The T
imeout controls the period between BPDU transmissions. Fast will transmit
LACP packets each second, while Slow will wait for 30 seconds before sending a
LACP packet.
Timeout
The Prio controls the prio
rity of the port. If the LACP partner wants to form a
larger group than is supported by this device then this parameter will control
which ports will be active and which ports will be in a backup role. Lower number
means greater priority.
Priority
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
