Planet IGS-20040MT - MVR Status

User’s Manual of IGS-20040MT
Caution: MVR source ports are not recommended to be overlapped with
management VLAN ports.
Select the port role by clicking the Role symbol to switch the setting.
I indicates Inactive; S indicates Source; R indicates Receiver
The default Role is Inactive.
Enable the fast leave o
n the port.
 Immediate Leave
Buttons
: Click to add new MVR VLAN. Specify the VID and configure the new entry. Click "Save"
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.8.17 MVR Status
This Page provides MVR status. The MVR Status screen in Figure 4-8-20 appears.
Figure 4-8-20: MVR Status Page Screenshot
The Page includes the following fields:
Object Description
The Multicast VLAN ID.
 VLAN ID
The number of Received Quer
ies for IGMP and MLD, respectively.
 IGMP/MLD Queries
Received
The number of T
ransmitted Queries for IGMP and MLD, respectively.
 IGMP/MLD Queries
Transmitted
The number of Received IGMPv1 Joins.
 IGMPv
1 Joins
Received
The number of Received IGMPv2 Joins a
nd MLDv1 Reports, respectively.
 IGMPv2/MLDv1
Reports Received
The number of Received IGMPv1 Joins a
nd MLDv2 Reports, respectively.
 IGMPv3/MLDv2
Reports Received
 IGMPv2/MLDv1 Leaves
Received
The number of Received IGMPv2 Leaves and MLDv1 Dones, respectively.
189