User’s Manual of IGS-20040MT
The Page includes the following fields:
Object Description
The VLAN ID of the entry
.
VLAN ID
Working Qu
erier Version currently.
Querier Version
Working H
ost Version currently.
Host Version
Show the Qu
erier status is "ACTIVE" or "IDLE".
Querier Status
The number of T
ransmitted Querier.
Querier Transmitted
The number of Received Quer
ier.
Querier Received
V1 Reports Received
The number of Received V1 Reports.
V2 Reports Received
The number of Received V2 Reports.
V3 Reports Received
The number of Received V3 Reports.
The number of Received V2
Leave.
V2 Leave Received
Display
which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
Router Port
Switc
h port number.
Port
Indicate wh
ether specific port is a router port or not.
Status
Buttons
: Click to refresh the Page immediately.
: Clears all Statistics counters.
Auto-refresh : Automatic refresh occurs every 3 seconds.
175
To Next Page
Loading...
