User’s Manual of IGS-20040MT
The Page includes the following fields:
Object Description
Controls w
hether Fault Alarm is enabled on this switch.
Enable
Controls w
hether Record is sending System log or SNMP Trap or both.
Record
Controls w
hether Port Fail or Power Fail or both for fault detecting.
Action
Controls w
hether DC1 or DC2 or both for fault detecting.
Power Alarm
Controls w
hich Ports or all for fault detecting.
Port Alarm
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
77
To Next Page
Loading...
