Point Grey Flea3 FL3-U3 - Page 7

Point Grey Flea3 USB 3.0 Technical Reference
6.4.4 Camera Behavior Between Triggers 83
6.4.5 Changing Video Modes While Triggering 83
6.4.6 Trigger Modes 84
6.4.6.1 Trigger Mode 0 (“Standard External Trigger Mode”) 84
6.4.6.2 Trigger Mode 1 (“Bulb Shutter Mode”) 84
6.4.6.3 Trigger Mode 15 (“Multi-Shot Trigger Mode”) 85
6.4.7 Example: Asynchronous Hardware Triggering (Using the Camera Registers) 86
6.4.8 Example: Asynchronous Hardware Triggering (Using the FlyCapture API) 88
6.4.9 Asynchronous Software Triggering 88
6.4.10 Asynchronous Trigger Settings 89
6.4.10.1 TRIGGER_MODE: 830h 90
6.4.10.2 TRIGGER_DELAY: 834h 90
6.4.10.3 PIO_DIRECTION: 11F8h 91
6.4.10.4 SOFTWARE_TRIGGER: 62Ch 91
6.4.10.5 ISO_CHANNEL/ISO_SPEED: 60Ch 91
6.4.10.6 ISO_EN/CONTINUOUS_SHOT: 614h 92
6.4.10.7 ONE_SHOT/MULTI_SHOT: 61Ch 92
7 Imaging Parameters and Control 94
7.1 Overview of Imaging Parameters 94
7.2 Brightness 95
7.2.1 BRIGHTNESS: 800h 95
7.2.2 Example: Setting Brightness Using the FlyCapture API 96
7.3 Gain 96
7.3.1 GAIN: 820h 97
7.3.2 Example: Setting Gain Using the FlyCapture API 98
7.4 Saturation 98
7.4.1 SATURATION: 814h 98
7.4.2 Example: Setting Saturation Using the FlyCapture API 99
7.5 Hue 100
7.5.1 HUE: 810h 100
7.5.2 Example: Setting Hue Using the FlyCapture API 101
7.6 Sharpness 101
7.6.1 SHARPNESS: 808h 102
7.6.2 Example: Setting Sharpness Using the FlyCapture API 103
7.7 Gamma and Lookup Table 103
7.7.1 GAMMA: 818h 105
7.7.2 Example: Setting Gamma Using the FlyCapture API 106
7.7.3 LUT: 80000h – 80048h (IIDC1.32) 106
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.