Point Grey Flea3 FL3-U3 - Page 8

Point Grey Flea3 USB 3.0 Technical Reference
7.8 White Balance 109
7.8.1 WHITE_BALANCE: 80Ch 110
7.8.2 Example: Setting White Balance Using the FlyCapture API 110
7.9 Shutter 111
7.9.1 Extended Shutter Times 112
7.9.2 SHUTTER: 81Ch 112
7.9.3 Example: Setting Shutter Using the FlyCapture API 113
7.10 Auto Exposure 114
7.10.1 AUTO_EXPOSURE: 804h 114
7.10.2 AE_ROI: 1A70 – 1A74h 115
7.10.3 Example: Setting Auto Exposure Using the FlyCapture API 116
7.11 Bayer Color Processing 117
7.11.1 Accessing Raw Bayer Data 117
7.11.2 BAYER_TILE_MAPPING: 1040h 118
7.11.3 Example: Accessing Raw Bayer Data using FlyCapture2 118
7.12 Image Flip/Mirror 119
7.12.1 MIRROR_IMAGE_CTRL: 1054h 119
7.13 Embedded Image Information 119
7.13.1 FRAME_INFO: 12F8h 120
8 Troubleshooting 122
8.1 Support 122
8.2 Camera Diagnostics 123
8.2.1 INITIALIZE: 000h 123
8.2.2 TIME_FROM_INITIALIZE: 12E0h 123
8.2.3 TIME_FROM_BUS_RESET: 12E4h 123
8.2.4 XMIT_FAILURE: 12FCh 124
8.2.5 VMODE_ERROR_STATUS: 628h 124
8.2.6 CAMERA_LOG: 1D00 – 1DFFh 124
8.3 Status Indicator LED 125
8.3.1 LED_CTRL: 1A14h 125
8.4 Test Pattern 126
8.4.1 TEST_PATTERN: 104Ch 126
8.5 Blemish Pixel Artifacts 127
8.5.1 Pixel Defect Correction 127
8.5.2 PIXEL_DEFECT_CTRL: 1A60h 127
8.6 Rolling Shutter Artifacts 128
8.7 Fixed Pattern Noise Artifact 129
8.7.1 FPN_CTRL: 1A0Ch 129
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.