4.42
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
Digital Wrench® Version and Update ID
Knowing what Digital Wrench® version and update is
installed will help determine which updates are required.
NOTE: Versions and updates are subject to change.
1. Open the Digital Wrench® software. Locate the
version ID shown on the lower right side of the Digital
Wrench® start-up screen.
2. Proceed to http://polaris. diagsys. com to see if a
newer update is available.
3. If a newer update is available, it should be
downloaded before using Digital Wrench® (see
“Digital Wrench® Updates”).
NOTE: Always operate with the latest update.
Digital Wrench® Updates
Updates are released for Digital Wrench® via the
Internet at: http://polaris. diagsys. com. The Digital
Wrench® website can also be accessed through the
dealer website at: www.polarisdealers.com.
NOTE: Only authorized Polaris dealers and
distributors can access the dealer website.
1. Log on to www.polarisdealers.com.
2. Locate the “Service and Warranty” drop-down
menu.
3. Click on “Digital Wrench Updates”.
4. The Digital Wrench® portal website should appear in
a new web browser.
5. Click on “Digital Wrench Version Updates”.
NOTE: You must already have the current
version installed before adding an update.
Updates will not install if you are using an older
version loaded on your PC.
ELECTRONIC FUEL INJECTION
To Next Page
Loading...
