8.8
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
22. Remove the two fasteners (Item 11) attaching the
rear transmission mount bracket assembly to the
frame. Remove the fasteners (Item 12) that attach
the rear mount to the transmission. Remove the
mount assembly from the vehicle.
23. Slide transmission towards the rear of the vehicle.
Lift and rotate the top of the transmission towards the
left side of the vehicle. With the help of an assistant,
remove transmission from the left rear wheel well
area.
TRANSMISSION INSTALLATION
1. With the help of an assistant, position the
transmission into the vehicle frame through the left
rear wheel well area.
2. Slide transmission towards rear of the vehicle and
rotate the top of the transmission toward the right
side of the vehicle.
3. Install the rear transmission mount to the frame and
secure with M8 bolts and nuts. Torque nuts to
specification.
Rear Transmission Mount Bracket Fasteners (Item 1):
17 ft-lb (23 Nm)
TRANSMISSION
To Next Page
Loading...
