8
8.15
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
24. To disassemble the shift shaft rail remove the snap
ring (X) from the end of the shift rail on either side.
CAUTION
Use caution when disassembling the shift rail. The
compressed springs on the shift rail may pop off
causing eye or face injury.
Snorkel Shaft Removal / Disassembly
CAUTION
The pinion shaft must be removed prior to removing the
snorkel shaft assembly. Failure to remove pinion shaft,
will result in damage to the snorkel shaft.
25. Extract the seal from the snorkel shaft to access the
snorkel tube for removal.
26. Using the Snorkel Tool (PA-50231), fully loosen the
snorkel tube.
27. Remove the snorkel tube and shaft assembly from
the transmission case.
28. Remove the snap ring (Y) and shim (Z) from the
snorkel shaft.
TRANSMISSION
To Next Page
Loading...
Need help?
General
